SIS HPP7 Direct Insertion Probe for the Agilent/HP 5973/5975 MSD
| Part No. | Description |
| HPP7 | Direct Probe and Probe Inlet System for HP 5973/5975 |
System Features
- Easy to Install – Mounts on the GC/MS Inlet Port
- PC Window for the Control of Temperatures and Ramp Rates
- Ballistic Ramp Rate >500 degrees per minute
- Up to 14 Levels of Programmable Temperature Ramping
- Probe PC Control Software Fully Integrated with ChemStation Software
- Can be used with either the turbo pump or diffusion pump version of 5973 and 5975
Direct Probe sample analysis can be accomplished on the Agilent (HP) 5973 or 5975 MSD with the new Direct Probe and Probe Inlet System from Scientific Instrument Services. The probe inlet mounts onto the GC/MS transfer line port and uses an indexed probe introduction guide to permit the direct insertion and removal of the probe into the MSD source without venting the MSD or scoring the probe rod. The probe can be either heated ballistically at ramp rates in excess of 500 degrees per minute or can be temperature programmed with up to 14 ramp rate levels. The probe temperatures, ramp rates, hold times, start and stop are all PC controlled and fully integrated with the Agilent ChemStation software (G1701DA and below). This permits the storage of the probe analysis parameters in the sample data files and the method files.