Stainless Steel Sparging Needles for Sample Purging System
Part No. | Pkg of | Length (cm) | ID (mm) | UOM | Pricing |
031205 | 5 | 11.5 | 0.12 | EA | |
8610306 | 2 | 16.0 | 0.12 | PK | — |
86103091 | 2 | 22.5 | 0.12 | PK | |
8610309 | 2 | 30.0 | 0.12 | PK | — |
031305 | 5 | 11.5 | 0.20 | EA | |
8610366 | 2 | 16.0 | 0.20 | PK | |
86103691 | 2 | 22.5 | 0.20 | PK | — |
8610369 | 2 | 30.0 | 0.20 | PK | — |
031405 | 5 | 11.5 | 0.25 | EA | |
031406 | 2 | 16.0 | 0.25 | PK | |
86103891 | 2 | 22.5 | 0.25 | PK | — |
8610389 | 2 | 30.0 | 0.25 | PK | — |
A variety of lengths of the stainless steel sparging needles are available for the S.I.S. Purge & Trap system. All needles are constructed from stainless steel capillary tubing, 0.50 mm O.D. Approximately 10 mm from the flat end a metal hub is attached for the seating and sealing of the needle in the fitting on the S.I.S. liquid purge head. The 5.0 mL sample tubes use the 16.0 cm long needles, and the 25.0 mL sample tubes use the 22.5 cm long needles. In addition the 11.5 cm long needles can be used with standard 12 mm x 75 mm long disposable Pyrex glass test tubes. Additional sizes listed are for use with other sample vials, flasks or specific requirements. Other sizes are available on special request.
Indicate number of packages.
Sparging needle OD (mm) = 0.5